How to make an all wood version of a machinist's vise

bench vise clamp diy exotic wood how to machinist make maker purpleheart vise woodworking

After building my all wood oak c-clamps, I was inspired to make a vise. I wanted something similar to a machinist's vise, like this:

my Machinist style vise made by Yost

This is one of my metal working vises and I am modeling my design on this. I also plan to  make some woodworking bench vises too, But I wanted to give this a try.

This style of vise is really quite simple. It has two primary components that are attached by a screw. The parts are the dynamic jaw, which is the one that moves in and out. And the static jaw, which is mounted to the workbench.

My only real problem was to create a design that could handle the stresses of heavy duty clamping...

stay tuned...

Newer Post

  • azicevoliwe on – Amoxicillin 500mg Capsules Amoxicillin Without Prescription

  • ojumevpoxeqa on – Amoxicillin 500mg Capsules Amoxicillin 500mg

  • zisosibpile on – Amoxicillin Amoxicillin No Prescription

  • udqeniqaba on – Amoxicillin 500 Mg Amoxicillin Without Prescription

  • David Hamon on

    could you uses a 1 1/2 threaded dowel for the screw and nut. on your vice build.

Leave a comment